Publications

[138] 3D DLP Fabrication of Electrically Conductive Polypyrrole Nanocomposites

S. C. Eiden, R. F. Sojka, C. Delavier, S. Grieger, J. Zaumseil, E. Blasco

Small Science , 2026, DOI: 10.1002/smsc.70422

[137] Volumetric 3D printing of microalgae-based engineered living materials

C. A. Spiegel, E. Blasco

Trends in Biotechnology, 2026, DOI: 10.1016/j.tibtech.2026.08.016

[136] A Bio-Based and Biocompatible Lipoate-Oil Platform for 3D Digital Light Processing

S. Gupta, P. S. Klee, R. Erber, C. A. Spiegel, E. Blasco

ACS Material Letters, 2026, DOI/10.1021/acsmaterialslett.6c00691

[135] Metastable Polymers for Circular 3D Printing

J. Markhart, P. Mainik, E. Blasco

Adv. Mater., 2026, e74682

[134] Illuminating new pathways: beyond conventional photochemistries for multi-photon 3D laser printing

P. S. Klee, S. O. Catt, E. Blasco

Materials Horizons, 2026, 13, 8914 - 8925

[133] Controlled Peptide Capture and Release in 3D-Printed Multimaterial Microstructures

N. Schwegler, T. Heim, P. Mainik, E. Blasco. F. Thomas

Advanced Science, 2026, DOI/10.1002/advs.76505

[132] Encoding and Encryption via Dual-Wavelength 3D Digital Light Processing    

F. Kröger, M. Swiatek, E. Blasco  

Angew. Chem., 2026, 38, e1978756

[131] Codesign of programmable materials across length scales and disciplines

C. M. Portela, D. W. Yee, E. Blasco, K. A. Brown, E. C. Davidson, S. Kumar

MRS Bulletin, 2026, 50, 770 - 786

[130] Predicting new research directions in materials science using large language models and concept graphs

T. Marwitz, A. Colsmann, B. Breitung, C. Brabec, C. Kirchlechner, E. Blasco, G. Cadilha Marques, H. Hahn, M. Hirtz, P. A. Levkin, Y. M. Eggeler, T. Schlöder, P. Friederich

Nature Machine Intelligence, 2026, 8, 535 - 544

[129] Bottlebrush Polymers for Multi-Photon 3D Laser Printing

M. Hopp, S. O. Catt, S. Gupta, C. Zhang, M. Muellner, E. Blasco

ACS Macro Letters, 2026, 15, 443 - 450

[128] 3D DLP Printed Mechanochromic Materials for Visual Signaling 

F. Kröger, C. A. Spiegel, E. Blasco

Materials Advances, 2026, 7,  3268 - 3275

[127] 4D microprinting of dual-shape- and triple-shape-memory polymers

L. Flórido Martins, C. A. Spiegel, E. Blasco

Cell Reports Physical Science, 2026, 103137

[126] Two-photon polymerized poly(ε-caprolactone) microstructures with shape-memory behavior under compressive loading

B. Van Durme, A. Quaak, C. Vazquez-Martel, K. Kacmaz, J. Brancart, S. Schandl, A. Ovsianikov, V. Van Rompaey, E. Blasco, Q. Thijssen, S. Van Vlierberghe

Adv. Mater. Technol. 2026, 0:e02471

[125] Lighting the future: 3D printing of smart and sustainable materials

C. A. Spiegel, L. Flórido Martins , E. Blasco

Trends in Chemistry, 2026, 8, 4, 162 - 176 

[124] A printable, unimolecular, core–shell polymer bottlebrush-based signal transducer using solvatochromatic reporting

C. Zhang, S. O. Catt, T. Hawtrey, P. Zeng, H. Zeng, S. D. Kerai, Y. T. Cheng, M. P. Hopp, Q. Yang, E. J. New, E. Blasco, M. Müllner

Chem. Sci., 2025, 17, 475 - 481

[123] nano-FFA: Ink Formulation and Process Optimization in Multiphoton 3D Laser Printing Using Full Factorial Analysis

C. Vazquez-Martel, S. O. Catt, E. Blasco

Nanoscale, 2025, 17, 26225 - 26237

[122] 4D Printing of Self-Immolative Polymers

J. Markhart, P. Mainik, P. S. Klee, E. Blasco

Adv. Funct. Mater. 2025, 36, e20642

[121] 3D Digital Light Processing of Redox-Active Polymers for Electrochemical Applications

C. Delavier, S. Bechtold, M. H. Dodds, E. Blasco, S. Ludwigs

Adv. Funct. Mater., 2025, 36, e18546

[120] Synergistic Two-Color Photochemical Polymer Network Formation and Lithography 

J. Hobich, X. Wu, F. Feist, W. Scheibel, N. Herdt, P. Somers, E. Blasco, H. Mutlu, C. Barner-Kowollik

Angew. Chem., Int. Ed., 2025, 64, e202518815

[119] Ultra-broadband plug-and-play photonic tensor core packaging with sub-dB loss

E. Jung, H. Gehring, F. Brueckerhoff-Plueckelmann, L. Kraemer, C. Vazquez-Martel, E. Blasco, W. Pernice

Sci. Adv., 2025, 11, eadz1883

[118] High resolution light-based 3D printing of a bio-sourced monomer with tuneable depolymerisation 

P. S. Klee, S. O. Catt, L. Sielaff, E. Blasco

Polym. Chem., 2025, 16, 4571 - 4579

[117] Deep Eutectic Inks for Multiphoton 3D Laser Microprinting

P. Mainik, C. A. Spiegel, J. Schneider, M. Wegener, E. Blasco

Adv. Mater., 2025, 37, 2507640

[116] Benchmarking Mechanical Properties of 3D Printed Elastomeric Microstructures

O. Eivgi, C. Vazquez-Martel, J. Lukeš, E. Blasco

Small Methods, 2025, 10, 2500432

[115] Vat Photopolymerisation of high molecular weight polymer latexes with pseudothermosplatic properties for recyclability

J. Ayestaran, X. Lopez de Pariza, F. Vidal, C. Vazquez-Martel, A. Pascal, S. Y. Miren Aguirre, A. Nelson, J. R. Leiza, E. Blasco, T. E. Long, R. Aguirresarobe, H. Sardon

Adv. Funct. Mater., 2025, 35, 2503712

[114] 4D Printing of Thermoresponsive OEGMA-Based Hydrogels with Tunable Response

H. B. D. Tran, C. A. Spiegel, E. Blasco

Macromol. Mater. Eng., 2025, 310, 70001 

[113] Multi-material single-vat-dual-wavelength DLP 4D printing of shape memory polymers

F. Kröger, L. Schulte, C. A. Spiegel, C. Vazquez-Martel, E. Blasco

Smart Mater. Struct., 2025, 34, 025001. Emerging Leaders 2024 Collection.

[112] Investigation of design of macromolecular-based inks on material properties for two-photon 3D laser printing 

S. O. Catt, C. Vazquez-Martel, E. Blasco

Mol. Syst. Des. Eng., 2025, 10, 176 - 183. HOT article.

[111] 4D Printing of Liquid Crystal Emulsions for Smart Structures with Multiple Functionalities

A. Concellón, P. Mainik, C. Vazquez-Martel, C. Álvarez-Solana, E. Blasco

Angew. Chem. Int. Ed., 2024, e202421162. Hot Paper.

[110] Responsive 3D printed microstructures based on collagen folding and unfolding

P. Mainik, C. Aponte-Santamaría, M. Fladung, R. E. Curticean, I. Wacker, G. Hofhaus, M. Bastmeyer, R. R. Schröder, F. Gräter, E. Blasco

Small, 2024, 2408597

[109] 4D printing roadmap

M. Bodaghi, L. Wang, F. Zhang, Y. Liu, J. Leng, R. Xing, M. D. Dickey, S. Vanaei, M. Elahinia, S. V. Hoa, D. Zhang, K. Winands, T. Gries, S. Zaman, H. Soleimanzadeh, T. Barši Palmić, J. Slavič, Y. Tadesse, Q. Ji, C. Zhao, L. Feng, K. Ahmed, M.D. N. I. Shiblee, L. Zeenat, F. Pati, L. Ionov, A. Chinnakorn, W. Nuansing, A. M. Sousa, J. Henriques, A. P. Piedade, E. Blasco, H. Li, B. Jian, Q. Ge, F. Demoly, H. J. Qi, J.-C. André, M. Nafea, Y.-F. Fu, B. Rolfe, Y. Tao, G. Wang, A. Zolfagharian

Smart Mater. Struct., 2024, 33, 113501

[108] Quantification of Synergistic Two-Color Covalent Bond Formation

J. Hobich, F. Feist, P. Werner, J. A. Carroll, O. Fuhr, E. Blasco, H. Mutlu, C. Barner-Kowollik

Angew. Chem. Int. Ed., 2024, accepted

[107] Constructing phase diagrams of block copolymers with A-block-(B-stat-C) architecture

B. Weidinger, N. von Coelln, G. Yang, H. Nirschl, I. Wacker, R. Schröder, P. Tegeder, E. Blasco

Polym. Chem. 2024, 15, 4093-4100

[106] Alignment and actuation of liquid crystals via 3D confinement and two-photon laser printing

L.-Y. Hsu, S. Gomez Melo, C. Vazquez-Martel, C. A. Spiegel, F. Ziebert, U. S. Schwarz, E. Blasco

Sci. Adv. 2024, 10, eadq2597

[105] Digital Light 3D Printing of Double Thermoplastics with Customizable Mechanical Properties and Versatile Reprocessability

G. Zhu, N. von Coelln, Y. Hou, C. Vazquez-Martel, C. A. Spiegel, P. Tegeder, E. Blasco

Adv. Mater. 2024, 36, 2401561

[104] Printing Green: Microalgae-based materials for 3D printing with light

C. Vazquez-Martel, L. Florido Martins, E. Genthner, C. Almeida, A. Martel Quintana, M. Bastmeyer, J. L. Gómez Pinchetti, E. Blasco

Adv. Mater. 2024, 36, 2402786

[103] Two-Photon Laser Printing of 3D Multicolor Emissive Polymer Microstructures

F. Kröger, R. Eichelmann, G. Sauter, A. Pollien, P. Tegeder, L. H. Gade, E. Blasco

RSC Appl. Polym. 2024, 2, 847 - 856

[102] Minimal-Invasive 3D Laser Printing of Microimplants in Organismo

C. Afting, P. Mainik, C. Vazquez-Martel, T. Abele, V. Kaul, G. Kale, K. Göpfrich, S. Lemke, E. Blasco, J. Wittbrodt

Adv. Sci. 2024, 241110

[101] Two‐Photon Direct Laser Writing of pNIPAM Actuators in Microchannels for Dynamic Microfluidics in Advanced Intelligent Systems 

C. Barwig, A. Sonn, T. Spratte, A. Mishra, E. Blasco, C. Selhuber-Unkel, S. Pashapour

Adv. Intell. Syst., 2024, 2300829

[100] Multimaterial 3D Laser Printing of Cell-Adhesive and Cell‑Repellent Hydrogels

N. Schwegler, T. Gerbert, M. Villiou, F. Colombo, B. Schamberger, C. Sellhuber-Unkel, F. Thomas, E. Blasco

Small, 2024, 2401344

[99] Mass production of 3D microcomponents

C. A. Spiegel, E. Blasco

Nature, 2024, 267, 276 - 277

[98] Investigating Dynamic Changes in 3D-Printed Covalent Adaptable Polymer Networks

Y. Jia, C. Spiegel, J. Diehm, C. Klein, D. Zimmermann, B. Huber, H. Mutulu, M. Franzreb, M. Wilhelm, P. Theato, E. Blasco, M. Tsotsalas

Macromol. Mater. Eng., 2024, 2300438

[97] Characteristics and long-term kinetics of an azobenzene derivative and a donor-acceptor Stenhouse adduct as orthogonal photoswitches

T. Schmidt, C. Huck, N. Oberhof, L.-Y. Hsu, E. Blasco, A. Dreuw, P. Tegeder

Phys. Chem. Phys., 2024, 26, 7190 - 7202

[96] 4D printing of adaptable “living” materials based on alkoxyamine chemistry

H. B. Duc Tran, C. Vazquez-Martel, S. O. Catt, Y. Jia, M. Tsotsalas, C. A. Spiegel, E. Blasco

Adv. Funct. Mater. 2024, 2315238

[95] Designing Sustainable Polymers: Lactate Esters for 3D Printing and Upcycling

P. S. Klee, C. Vazquez-Martel, L. Florido Martins, E. Blasco 

ACS Appl. Polym. Mater. 2024, 6, 935 - 942. Editors' choice.

[94] Recent Advances in Multi-Photon 3D Laser Printing: Active Materials and Applications

P. Mainik, C. A. Spiegel, E. Blasco 

Adv. Mater. 2023, 2310100. Hall of Fame Collection.

[93] Understanding the Optical Properties of Doped and Undoped 9-Armchair Graphene Nanoribbons in Dispersion

S. Lindenthal, D. Fazzi, N. F. Zorn, A. A. El Yumin, S. Settele, B. Weidinger, E. Blasco, J. Zaumseil

ACS Nano 2023, 17, 18240 - 18252

[92] Recyclable photoresins for light-mediated additive manufacturing towards Loop 3D printing

X. Lopez de Pariza, O. Varela, S. O. Catt, T. Long, E. Blasco, H. Sardon

Nat. Comm. 2023, 14, 5504

[91] Closed-Loop Recyclable Silica-Based Nanocomposites with Multifunctional Properties and Versatile Processability

Y. Hou, G. Zhu, S. O. Catt, Y. Yin, J. Xu, E. Blasco, N. Zhao

Adv. Sci. 2023, 10, 2304147

[90] Photochemically Activated 3D Printing Inks: Current Status, Challenges, and Opportunities

S. C. Gauci, A. Vranic, E. Blasco, S. Bräse, M. Wegener, C. Barner-Kowollik

Adv. Mater. 2023, 2306468

[89] Two-Photon Microprinting of 3D Emissive Structures Using Tetraazaperylene-Derived Fluorophores

R. Eichelmann, J. Monti, L.-Y. Hsu, F. Kröger, J. Ballmann, E. Blasco, L. H. Gade

Mol. Syst. Des. Eng. 2023, 8, 1470 - 1476. HOT Article.

[88] 3D Printing Hierarchically Nano-ordered Structures

B. Weidinger, G. Yang, N. von Coelln, H. Nirschl, I. Wacker, P. Tegeder, R. R. Schröder, E. Blasco

Adv. Sci. 2023, 10, 2302756

[87] Deconstructing 3D Structured Materials by Modern Ultramicrotomy for Multimodal Imaging and Volume Analysis Across Length Scales

I. Wacker, R. Curticean, D. Ryklin, B. Weidinger, F. Mayer, L. Huang, J. Hofmann, M. Islam, N. von Coelln, T. Schmitt, C. Huck, P. Tegeder, F. Feist, J. A. Kammerer, C. Barner-Kowollik, M. Wegener, E. Blasco, U. Gengenbach, R. R. Schröder

Adv. Funct. Mater. 2023, 202302025

[86] DLP 4D Printing of Multi-responsive Bilayered Structures

P. Mainik, L-Y. Hsu, C. W. Zimmer, D. Fauser, H. Steeb, E. Blasco

Adv. Mater. Technol. 2023, 2300727

[85] Highly efficient photoinitiators based on 4H-pyranylidene derivatives for two-photon laser printing

R. Royo, P. Mainik, C. Benitez-Martin, R. Andreu, E. Blasco, F. Najera, B. Villacampa

Adv. Mater. Technol. 2023, 2300571

[84] Ultrafast excited states dynamics of orthogonal photoswitches and the influence of the environment

T. Schmitt, L-Y. Hsu, N. Oberhof, D. Rana, A. Dreuw, E. Blasco, P. Tegeder

Adv. Funct. Mater. 2023, 2300863

[83] Introducing Dynamic Covalent Bonds in Light-based 3D Printing

G. Zhu, H. A. Houck, C. A. Spiegel, C. Selhuber-Unkel, Y. Hou, E. Blasco

Adv. Funct. Mater. 2023, 2300456

[82] Macromolecular Engineering: From Precise Macromolecular Inks to 3D Printed Microstructures

S. O. Catt, M. Hackner, J. P. Spatz, E. Blasco

Small 2023, 2300844. Back Cover.

[81] Two Functions from a Single Photoresist: Tuning Microstructure Degradability from Light-Stabilized Dynamic Materials

S. C. Gauci, K. Ehrmann, M. Gernhardt, B. Tuten, E. Blasco, H. Frisch, V. Jayalatharachchi, J. P. Blinco, H. A. Houck, C. Barner-Kowollik

Adv. Mater. 2023, 35, 2300151

[80] 4D Printing of Light Activated Shape Memory Polymers with Organic Dyes

M. Gastaldi, C. A. Spiegel, C. Vazquez-Martel, C. Barolo, I. Roppolo, E. Blasco

Mol. Syst. Des. Eng. 2023, 8, 323-329

[79] Laser Printed Microelectronics

L. Yang, H. Hu, A. Scholz, F. Feist, G. Cadilha Marques, S. Kraus, N. M. Bojanowski, E. Blasco, C. Barner-Kowollik, J. Aghassi-Hagmann, M. Wegener

Nat. Commun. 2023, 14, 1103

[78] Aqueous seeded RAFT polymerization for the preparation of self-assemblies containing nucleobase analogues

M. Abad, M. Nardi, L. Oriol, M. Piñol, E. Blasco

Polym. Chem. 2023, 14, 71

[77] Challenges and Opportunities in 3D Laser Printing Based on (1 + 1)-Photon Absorption

V. Hahn, N. M. Bojanowski, P. Rietz, F. Feist, M. Kozlowska, W. Wenzel, E. Blasco, S. Bräse, C. Barner-Kowollik, M. Wegener

ACS Photonics 2023, 10, 24

[76] Search for Alternative Two-Step-Absorption Photoinitiators for 3D Laser Nanoprinting

M. N. Bojanowski, A. Vranic, V. Hahn, P. Rietz, T. Messer, J. Brückel, C. Barner-Kowollik, E. Blasco, S. Bräse, M. Wegener

Adv. Funct. Mater. 2022, 2212482

[75] Natural and naturally derived photoinitiating systems for light-based 3D printing

C. Vazquez-Martel, P. Mainik, E. Blasco

Organic Materials 2022, 4, 281-291

[74] Synergistic, Orthogonal, and Antagonistic Photochemistry for Light-Induced 3D Printing

J. Hobich, E. Blasco, M. Wegener, H. Mutlu, C. Barner-Kowollik

Macromol. Chem. Phys. 2022, 2200318

[73] Light-sheet 3D microprinting via two-colour two-step absorption
V. Hahn, P. Rietz, F. Hermann, P. Müller, C. Barner-Kowollik, T. Schlöder, W. Wenzel, E. Blasco, M. Wegener

Nat. Photon. 2022, 16, 784

[72] 3D Optomechanical Metamaterials
A. Münchinger, L-Y. Hsu, F. Fürniß, E. Blasco and M. Wegener

Mater. Today 2022, 59, 9

[71] Covalent adaptable microstructures via combining two-photon laser printing and alkoxyamine chemistry: towards living 3D microstructures

Y. Jia, C. A. Spiegel, A. Welle, S. Heißler, E. Sedghamiz, M. Liu, W. Wenzel, M. Hackner, J. P. Spatz, M. Tsotsalas, E. Blasco

Adv. Funct. Mater. 2023, 33, 2207826

[70] Material-independent 3D patterning via two-photon lithography and discontinuous wetting

Z. Dong, J.Monti, H.Cui, A. Welle, S. A. Singaraju, E. Blasco, P. A. Levkin

Adv. Mater. Technol. 2022, 8, 2201288

[69] A Facile Approach for 4D Microprinting of Multi-photoresponsive Actuators

L.-Y. Hsu, P. Mainik, A. Münchinger, S. Lindenthal, T. Spratte, A. Welle, J. Zaumseil, C. Selhuber-Unkel, M. Wegener, E. Blasco

Adv. Mater. Technol. 2022, 8, 2200801

[68] Increasing the Efficiency of Thermoresponsive Actuation at the Microscale by Direct Laser Writing of pNIPAM

T. Spratte T, S. Geiger, F. Colombo, A. Mishra, M. Taale, L.-Y. Hsu, E. Blasco, C. Selhuber-Unkel

Adv. Mater. Technol. 2022, 2200714

[67] A Simplified Approach to Thermally Activated Delayed Fluorescence (TADF) Bipolar Host Polymers

S. V. Kunz, C. M. Cole, S. C. Gauci, F. Zaar, T. Baumann, P. Sonar, S. D. Yambem, E. Blasco, C. Barner-Kowollik, J. P. Blinco

Polym. Chem. 2022,13, 4241

[66] Two-Photon Laser Microprinting of Highly Ordered Nanoporous Materials Based on Hexagonal Columnar Liquid Crystals

J. Monti, A. Concellón, R. Dong, M. Simmler, A. Münchinger, C. Huck, P. Tegeder, H. Nirschl, M. Wegener, C. Osuji, E. Blasco

ACS Appl. Mater. Interfaces 2022, 14, 33746

[65] 3D Printed Microstructures Erasable by Darkness

S.C. Gauci, M. Gernhardt, H. Frisch, H. Houck, J.P. Blinco, E. Blasco, B.T. Tuten, C. Barner-Kowollik

Adv. Funct. Mater. 2022, 2206303

[64] 4D Printing of Shape Memory Polymers: From Macro to Micro

C. A. Spiegel, M. Hackner, V. P. Bothe, J. P. Spatz, E. Blasco

Adv. Funct. Mater. 2022, 144, 2110580. Women in Material Science Collection.

[63] Wavelength Resolved PhotoATRP 

M. Nardi, E. Blasco, C. Barner-Kowollik

J. Am. Chem. Soc. 2022, 144, 1094–1098

[62] In Situ Diagnostics and Role of Light-Induced Forces in Metal Laser Nanoprinting

L. Yang, A. Rahimzadegan, V. Hahn, E. Blasco, C. Rockstuhl, M. Wegener

Laser Photonics Rev. 2022, 2100411

[61] Two-step absorption instead of two-photon absorption in 3D nanoprinting

V. Hahn, T. Messer, N. M. Bojanowski, E. R. Curticean, I. Wacker, R. R. Schröder, E. Blasco, M. Wegener

Nat. Photon. 2021, 15, 932

[60] Vegetable Oils as Sustainable Inks for Additive Manufacturing: A Comparative Study

C. Vázquez-Martel, L. Becker, W. Liebig, P. Elsner, E. Blasco

ACS Sustainable Chem. Eng. 2021, 15, 16840. Back Cover.

[59] Multi-Photon 4D Printing of Complex Liquid Crystalline Microstructures by In Situ Alignment Using Electric Fields 

A. Münchinger, V. Hahn, D.Beutel, S. Wosk, J. Monti, C. Rockstuhl, E. Blasco, M. Wegener

Adv. Mater. Technol. 2021, 202100944

[58] Emissive semi-interpenetrating polymer networks for ink-jet printed multilayer OLEDs

S. V. Kunz, C. M. Cole, T. Baumann, P. Sonar, S. D. Yambem, E. Blasco, C. Barner-Kowollik, J. P. Blinco

Polym. Chem. 2021, 12, 5567

[57] Multi-material multi-photon 3D laser micro- and nanoprinting

L. Yang, F. Mayer, U. H. F. Bunz, E. Blasco, M. Wegener

Light: Advanced Manufacturing 2021, 2, 17

[56] Chain-Length-Dependent Photolysis of ortho-Nitrobenzyl-Centered Polymers

J. Bachmann, C. Petit, L. Michalek, Y. Catel, E. Blasco, J. P. Blinco, A.-N. Unterreiner, C. Barner-Kowollik

ACS Macro Lett. 2021, 10, 447

[55] Stabilizing self-assembled nano-objects using light-driven tetrazole chemistry

M. Nardi, T. Scherer, L. Yang, C. Kübel, C. Barner-Kowollik, E. Blasco

Polym. Chem. 2021, 12, 1627

[54] UV-induced photolysis of polyurethanes

C. Petit, J. Bachmann, L. Michalek, Y. Catel, E. Blasco, J. P. Blinco, A.-N. Unterreiner, C. Barner-Kowollik

Chem. Commun. 2021, 57, 2911

[53] 3D printing enabled by light and enabling the manipulation of light: feature issue introduction
E. Blasco, S. Maruo, X. Xu, M. Wegener, Opt. Mater. Express, 2020, 10, 3414.

[52] Hierarchical ordering in light-triggered additive manufacturing
J. Monti, E. Blasco, Polym. Chem. 2020, 11, 7316.

[51] Tunable photonic devices by 3D laser printing of liquid crystal elastomers
S. Woska, A. Münchinger, D. Beutel, E. Blasco, J. Hessenauer, O. Karayel, P. Rietz, S. Pfleging, R. Oberle, C. Rockstuhl, M. Wegener, H. Kalt, Opt. Mater. Express 2020, 10, 2928.

[50] Enzyme‐Degradable 3D Multi‐Material Microstructures
D. Gräfe, M. Gernhardt, J. Ren, E. Blasco, M. Wegener, M. A. Woodruff, C. Barner-Kowollik, Adv. Funct. Mater. 2020, 2006998.

[49] Sensitive Photoresists for Rapid Multiphoton 3D Laser Micro- and Nanoprinting
P. Kiefer, V. Hahn, M. Nardi, L. Yang, E. Blasco, C. Barner-Kowollik, M. Wegener, Adv. Optical Mater. 2020, 8, 2000895.

[48] Mechanical stimulation of single cells by reversible host-guest interactions in 3D microscaffolds
M. Hippler, K. Weißenbruch, K. Richler, E. D. Lemma, M. Nakahata, B. Richter, C. Barner-Kowollik, Y. Takashima, A. Harada, E. Blasco, M. Wegener, M. Tanaka, M. Bastmeyer, Sci. Adv. 2020, 6, eabc2648.

[47] Shining Light on Poly(ethylene glycol): From Polymer Modification to 3D Laser Printing of Water Erasable Microstructures
H. A. Houck, P. Müller, M. Wegener, C. Barner-Kowollik, F. E. Du Prez, E. Blasco, Adv. Mater. 2020, 32, 2003060.

[46] It's in the Fine Print: Erasable Three‐Dimensional Laser‐Printed Micro‐ and Nanostructures
D. Gräfe, S.L. Walden, J. Blinco, M. Wegener, E. Blasco, C. Barner-Kowollik, Angew. Chem., Int. Ed. 2020, 59, 6330.

[45] A printable thermally activated delayed fluorescence polymer light emitting diode
C.M. Cole, S.V. Kunz, P.E. Shaw, N.P Thoebes, T. Baumann, E. Blasco, J.P. Blinco, P. Sinar, C. Barner-Kowollik, S.D. Yambem, J. Mater. Chem. C, 2020, 8, 13001.

[44] Multi-Material 3D microstructures with photochemically adaptive mechanical properties
M. Gernhardt, H. Frisch, A. Welle, R. Jones, M. Wegener, E. Blasco, C. Barner-Kowollik, J. Mater. Chem. C, 2020, 8, 10993.

[43] 4D Printing at the Microscale
C. A. Spiegel, M. Hippler, A. Münchinger, M. Bastmeyer, C. Barner-Kowollik, M. Wegener, E. Blasco, Adv. Funct. Mater. 2020, 30, 1907615.

[42] Rapid Assembly of Small Materials Building Blocks (Voxels) into Large Functional 3D Metamaterials
V. Hahn, P. Kiefer, T. Frenzel, J. Qu, E. Blasco, C. Barner-Kowollik, M. Wegener, Adv. Funct. Mater. 2020, 30, 1907795.

[41] Photo-cross-linkable polymer inks for solution-based OLED fabrication
S. V. Kunz, C. M. Cole, A. Welle, P. E. Shaw, P. Sonar, N.-P- Thoebes, T. Baumann, S. D. Yambem, E. Blasco, J. P. Blinco, C. Barner-Kowollik, Macromolecules 2019, 52, 9105.

[40] Two in One: Light as a Tool for 3D Printing and Erasing at the Microscale
R. Batchelor, T. Messer, M. Hippler, M. Wegener, C. Barner-Kowollik, E. Blasco, Adv. Mater 2019, 31, 1904085.

[39] Epoxy Resins for Negative Tone Photoresists
V. Vlnieska, A. Mikhaylov, M. Zakharova, E. Blasco, D. Kunka, Polymers 2019, 11, 1457.

[38] Self-reporting visible light-induced polymer chain collapse
J. Offenloch, E. Blasco, S. Bastian, C. Barner-Kowollik, H. Mutlu, Polym. Chem. 2019, 10, 4513. Highlighted on the cover.

[37] On the Schwarzschild Effect in 3D Two-Photon Laser Lithography
L. Yang, A. Muenchinger, M. Kadic, V. Hahn, F. Mayer, E. Blasco, C. Barner-Kowollik, M. Wegener, Adv. Opt. Mater. 2019, 7, 1901040.

[36] Light-Stabilised Dynamic Materials
H. A. Houck, E. Blasco, F. E. Du Prez, C. Barner-Kowollik, J. Am. Chem. Soc. 2019, 141, 12329. Highlighted on the cover.

[35] Tailoring the Mechanical Properties of 3D Microstructures Using Visible Light
M. Gernhardt, E. Blasco, M. Hippler, J. P. Blinco, M. Bastmeyer, M. Wegener, H. Frisch, C. Barner-Kowollik, Adv. Mater. 2019, 31, 1901269.

[34] Photoresists: Access to Disparate Soft Matter Materials by Curing with Two Colors of Light
S. Bialas, L. Michalek, D. E. Marschner, T. Krappitz, M. Wegener, J. P. Blinco, E. Blasco, H. Frisch, C. Barner-Kowollik, Adv. Mater. 2019, 31, 1807288.

[33] STED-inspired Laser Lithography Based on Photoswitchable Spirothiopyran Moieties 
P. Mueller, R. Mueller, L. Hammer, C. Barner-Kowollik, M. Wegener, E. Blasco, Chem. Mater. 2019, 31, 1966.

[32] Controlling the Shape of 3D Microstructures by Temperature and Light
M. Hippler, E. Blasco, J. Qu, M. Tanaka, C. Barner-Kowollik, M. Wegener, M. Bastmeyer, Natur. Commun. 2019, 10, 232.

[31] Multi-Material 3D Laser Micro-Printing using an Integrated Microfluidic System
F. Mayer, S. Richter, J. Westhauser, E. Blasco, C. Barner-Kowollik, M. Wegener, Sci. Adv. 2019, 5, eaau9160.

[30] 3D Scaffolds to Study Basic Cell Biology
M. Hippler, E. D. Lemma, S. Bertels, E. Blasco, C. Barner-Kowollik, M. Wegener, M. Bastmeyer, Adv. Mater.2019, 31, 1808110. Invited review.

[29] Adding Chemically Selective Subtraction to Multi-Material 3D Additive  Manufacturing
D. Gräfe, A. Wickberg, M. M. Zieger, M. Wegener, E. Blasco, C. Barner-Kowollik, Nat. Comm 2018, 9, 2788. Highlighted in Nature Communications Editors' Webpage

[28] A Subtractive Photoresist Platform for Micro- and Macroscopic 3D Printed Structures 
M. M. Zieger, P. Müller, E. Blasco*, C. Petit, V. Hahn, L. Michalek, H. Mutlu, M. Wegener, C. Barner-Kowollik, Adv. Funct. Mater. 2018, 28, 1801405.

[27] Folding Polymer Chains with Visible Light
C. Heiler, S. Bastian, P. Lederhose, J. P. Blinco, E. Blasco, C. Barner-Kowollik, Chem. Commun. 2018, 54, 3476.

[26] Spatially  Resolved  Coding  of  λ-Orthogonal  Hydrogels  by  Laser  Lithography
R. R. Batchelor,  E. Blasco,  K. N. R. Wuest, H. Lu,  M. Wegener, C. Barner-Kowollik, M. H. Stenzel, Chem. Commun. 2018, 54, 2436.

[25] Characterizing Single Chain Nanoparticles: A Critical Survey
E. Blasco, B. T. Tuten, H. Frisch, A. Lederer, C. Barner-Kowollik, Polym. Chem. 2017, 8, 5845.

[24] Polymer Functionalization
E.  Blasco,  M.  Sims,  A.  S.  Goldmann,  B.  Sumerlin,  C.  Barner-Kowollik, Macromolecules 2017, 50, 5215. Invited perspective, highlighted on the cover.

[23] Photo-reversible bonding and cleavage of block copolymers
 S.Telitel, E. Blasco, L. D. Bangert, F. H. Schacher, A. S. Goldmann, C. Barner-Kowollik, Polym. Chem. 2017, 8, 4038.

[22] 3D Laser Micro- and Nano-printing: Challenges for Chemistry
C. Barner-Kowollik, M. Bastmeyer, E. Blasco, G. Delaittre, P. Mueller, B. Richter, M. Wegener, Angew. Chem. Int. Ed. 2017, 56, 15828. Invited Review.

[21] Photochemically Induced  Folding  of Single Chain Polymer Nanoparticles in Water
C. Heiler, J. T. Offenloch, E. Blasco, C. Barner-Kowolik, ACS Macro Lett. 2017, 6, 56. Highlighted on the cover.

[20] Understanding  Reactivity  Patterns  in  Light  Induced  Nitrile  Imine  Mediated  Tetrazole-Ene Cycloadditions
E. Blasco, Y. Sugawara, P. Lederhose,  J. P. Blinco,  A. M. Kelterer, C. Barner-Kowollik, ChemPhotoChem 2017, 1, 159. Highlighted on the cover.

[19] Photochemical-Driven Polymeric Network Formation: Synthesis and Applications
E. Blasco, M. Wegener, C. Barner-Kowollik, Adv. Mater. 2017, 29, 1604005. Invited review.

[18] Light-Responsive  Self-Assembled  Materials  by  Supramolecular Postfunctionalization  via  Hydrogen  Bonding  of  Amphiphilic  Block  Copolymers
A. Concellon, E. Blasco, A. Martínez-Felipe, J. C. Martínez, I. Šics, T. A. Ezquerra, A. Nogales, M.  Piñol,  L.  Oriol, Macromolecules, 2016, 49, 7825.

[17] Polymer-Fullerene Network Formation via Light Induced Crosslinking 
Y. Sugawara, K. Hiltebrandt, E. Blasco, C. Barner-Kowollik, Macromol. Rapid Commun. 2016, 37, 1466.

[16] Fabrication of Conductive 3D Gold-Containing Microstructures via Direct Laser Writing
E. Blasco, J. B. Müller, P.  Müller, V. Trouillet, C. Barner-Kowollik, M. Wegener, Adv. Mater. 2016, 28, 3592.

[15] Self-assembly of thermo and light responsive amphiphilic linear dendritic block copolymers
H. Garcia-Juan, A. Nogales, E. Blasco, J.C. Martinez, I. Sics, T.A. Ezquerra, M. Piñol, L. Oriol, Eur. Pol. J. 2016, 81, 621.

[14] Designing  π-Conjugated  Polymeric  Nano-  and  Microstructures  via  Light  Induced  Chemistry
E. Blasco, B. Yameen, A. S. Quick, P. Krolla-Sidenstein, M. Wegener, C. Barner-Kowollik, Macromolecules, 2015, 48, 8718.

[13] Light-Driven Nitrile Imine-Mediated Tetrazole-Ene Cycloaddition as a Versatile Platform for Fullerene Conjugation
Y. Sugawara,  N. Jasinski,  M.  Kaupp,  M,  A. Welle,  N,  Zydziak,  E.  Blasco,  C. Barner-Kowollik, Chem. Comm. 2015, 51, 13000.

[12] Photoresponsive Polymers and Block Copolymers  by  Molecular Recognition  Based  on  Multiple Hydrogen Bonds
A. Concellón, E. Blasco, M. Piñol, L. Oriol, I. Díez, C. Berges, C. Sánchez-Somolinos, R. Alcalá, J. Polym. Sci., Part A: Polym. Chem. 2014, 52, 3173.

[11] Self-Assembly and Photoinduced Optical Anisotropy in Dendronized Supramolecular Azopolymers
J. Del Barrio, E. Blasco, C. Toprakcioglu, A. Koutsioubas, O.A. Scherman, L. Oriol, C. Sánchez-Somolinos, Macromolecules, 2014, 47, 897.

[10] A Novel Photoresponsive Azobenzene-Containing Miktoarm Star Polymer: Self-Assembly and Photoresponse Properties
E. Blasco, B. V. K. J. Schmidt, C. Barner-Kowollik, M. Piñol, L. Oriol, Macromolecules, 2014, 47, 3693.

[09] Responsive Linear‐Dendritic Block Copolymers
E. Blasco, M. Piñol, L. Oriol, Macromol. Rapid Commun. 2014, 35, 1090. Invited featured article, highlighted on the cover.

[08] Highly  Selective  Dispersion  of  Single-Walled  Carbon  Nanotubes  via  Polymer Wrapping: A Combinatorial Study via Modular Conjugation
P. Gerstel, S. Kulmpp, F. Hennrich, A. Poschlad, E. Blasco, W. Wenzel, W. Kappes, C. Barner-Kowollik, ACS Macro Lett. 2014, 3, 10.

[07] Dual thermo- and photo-responsive micelles based on miktoarm star polymers
E. Blasco, B. V. K. J. Schmidt, C. Barner-Kowollik, M. Piñol, L. Oriol, Polym. Chem. 2013, 4, 4506.

[06] Light-Responsive Vesicles Based on Amphiphilic Linear-Dendritic Block Copolymers
E. Blasco, J. L. Serrano, M. Piñol, L. Oriol, Macromolecules 2013, 46, 5951.

[05] Photochemical Generation of Light Responsive Surfaces
E. Blasco,  M.  Piñol,  L. Oriol,  B.  V.K.J.  Schmidt,  A.  Welle,  V.  Trouillet,  M.  Bruns,  C.  Barner-Kowollik, Adv. Funct. Mater. 2013, 23, 4011.

[04] Light Induced Molecular Release from Vesicles Based on Amphiphilic Linear-Dendritic Block Copolymers
E. Blasco, J. Barrio, C. Sánchez-Somolinos, M. Piñol, L. Oriol, Polym. Chem. 2013, 4, 2246-2254. Highlighted on the cover.

[03] Homopolymer and  Diblock Copolymer-Azobenzene Complexes through Hydrogen Bonding: Self-Assembly  and  Stable Photoinduced Optical Anisotropy
J.  Barrio,  E. Blasco, L. Oriol, R. Alcalá, C. Sánchez-Somolinos, J. Polym. Sci. Part A: Polym. Chem. 2013, 51, 1716–1725. Highlighted on the cover.

[02] Azobenzene- containing  Linear  Dendritic  Block  Copolymers  Prepared  by  Sequential ATRP  and  Click Chemistry
E. Blasco, J. Barrio, M. Piñol, L. Oriol, C. Berges, C. Sánchez, R. Alcalá, Polymer 2012, 53, 4604-4613.

[01] Matrix Order Influence on the Nonlinear Optical Properties of Dispersed Chromophore-Azopolymer Systems
R. Alicante, R. Cases, B. Villacampa, E. Blasco, Macromol. Chem. Phys. 2012, 213, 776−783.